Duct Joints and Duct Accessories

Straight Connector

Microduct snap-in connectors for quick and easy splicing of microducts. The body is transparent for easy fault location during installation. The connector is available for 12/10 mm and 10/8 mm ducts. The connectors are sold in packages of 100pcs.

Straight Connector – Direct Buried

Microduct snap-in connectors for quick and easy splicing of microducts. The connector is available for 14/10mm ducts and can be direct buried. It is equipped with safety locks for unaccidental opening during installation. The connectors are sold in packages of 100pcs.

Divisible Seals

The divisible seals for microducts provide a gas and watertight seal for open duct ends installed with micro cables. The seals are designed to be installed after the fiber or cable has been blown in to the microduct. The seals are sold in packages of 25pcs.

Gas Block Connector

Gas block microduct snap-in connectors are used to seal around cables at the end of the duct. After cable installation, the connector can be gas sealed by Pushing the connector ends together.

End Stop Connector

Microduct snap-in, end-stop connectors for permanent or temporarily sealing of unused microducts to prevent water and dust getting into the duct. The connectors are sold in packages of 100pcs.

End Stop – Direct Buried

Microduct snap-in, end-stop connectors for permanent or temporarily sealing of unused microducts to prevent water and dust getting into the duct. This type is intended for thick walled ducts. The connectors are sold in packages of 100pcs.

Duct Joint – Straight

A series of straight duct closures for quick and easy installation without the need for heat. The closure is available in several sizes. Microduct snap-in connectors are not included. The closures are delivered in packages of 10pcs.

Duct Joint – Heat Shrink

A series of straight duct closures for maximum protection of duct joints for direct buried applications. Heat shrink technology is used for maximum protection. The closure is available in three different sizes and includes microduct snap-in connectors for 1, 4 or 7 microducts. Connectors for 10/8mm ducts are included.

Duct Joint – Branch Closures

Closure suitable for branching as well as jointing ducts. The closure provides mechanical protection of the duct joints. The closures are delivered in packages of 8 or 4 pcs. Note that sealing kits are ordered separately. Sealing kits are delivered in packages of 10pcs.

Duct Joint and Branch Kit

Flexible kit including materials and tools for jointing, branching and mid-span of microducts/multiducts. A vulcanizing cloth is used for sealing, and strong and flexible PVC tape provides mechanical protection. Microduct snap-in connectors are not included. NDE 451 40/2 is a low-cost kit without tools.

End Caps

Rubber covers used for temporary sealing of unused multiducts to prevent water and dust from getting into the ducts. The caps are available in several versions for different types of ducts. The end sleeves are delivered in packages of 100, 50 or 20pcs depending on type.